Care & Cleaning

For best results, keep the following in mind when caring for your KOHLER® product:

  • Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
  • Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and dry any overspray that lands on nearby surfaces.
  • Do not allow cleaner to soak.
  • Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces.
  • Click here for warranty information.


* Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas.

    Faucets & Fittings

    Chrome & Vibrant® PVD Colors/Finishes

    Chrome & Vibrant® PVD Colors/Finishes

    • Do not use cleaners containing ammonia, bleach or acid.
    • Rinse thoroughly and use a soft cloth to wipe the product dry after each use.
    • The Oil-Rubbed Bronze finish should be cleaned only with Windex Original.


    Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas mentioned.

     

    Care Tip

    • The ideal cleaning technique is to always blot dry any water from metal surfaces. Allowing water to evaporate on metal will form water deposits. It is important to use a dabbing action to dry metal, not an abrasive or rubbing action. Cleaning with a damp sponge and buff drying should keep your product looking beautiful.

    Vitreous China Faucets and Finishes

    Vitreous China Faucets and Finishes

    • Rinse thoroughly and use a soft cloth to wipe the product dry after each use.
    • Soft abrasive cleaners may be used when necessary to clean KOHLER® vitreous china products. Strong abrasive cleaners will scratch and dull the surface.


    Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas mentioned.

    Click here for warranty information or call Toll Free no. 1 800 103 224.

    * Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas.